







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in Henderson, NV
Measure the rough opening, not the glass. On a Henderson stucco home, you get the rough opening by probing behind the stucco return at the interior drywall reveal and measuring the frame opening at three points per dimension – top, middle, bottom for width, and left, center, right for height – then sizing the new unit to the smallest number with a shim and sealant allowance. The visible daylight opening you’d measure with a tape against the glass is the wrong number, and ordering from it guarantees rework. If that sounds like more than a Saturday project, call Groundwork Construction Co. of Henderson at (844) 320-6757 and we’ll measure it right the first time.
Henderson got built out largely in the 1990s and 2000s boom – Green Valley, Anthem, Seven Hills – so nearly every window we touch is a replacement in a stucco-and-tile tract or semi-custom home that’s old enough to have moved. Twenty-five summers of thermal cycling push and pull on stucco and sealant, and the openings aren’t square anymore. That’s the whole reason a single spot measurement fails here.

Why the Glass Measurement Fails on a Henderson Stucco Home
Stucco returns are the culprit. When a window goes into a wood-frame home, the opening is framed and sheathed and fairly predictable. A stucco wall adds a return – the finished stucco edge that wraps into the window opening – and that return eats 1 to 2 inches per side. It’s not uniform either. It’s floated by hand over a lath and scratch coat, and it thickens and thins around the opening. Measure the daylight opening and you’ll under-order by 2 to 4 inches across the unit, or over-order and fight a frame that won’t seat.
The rough opening behind that return is what the replacement window actually has to fit. You find it by measuring from inside the frame reveal at the interior drywall return, not at the glass face. On a flanged Andersen or Marvin unit, the flange has to land on the framing and flash against the wall, so you need the true framed opening plus the depth to know how the flange and the new trim will sit.
What we look for before ordering anything:
- Rough opening width – measured at the top, middle, and bottom of the opening, never once.
- Rough opening height – at the left, center, and right.
- Frame depth – critical on stucco walls, because a flanged Andersen or Marvin unit needs the right reveal to flash and finish cleanly.
- Stucco return condition – cracks, soft spots, or a return that’s pulled away tell you flashing needs attention before a new unit goes in.
- Out-of-square check – compare all six readings; the spread is the whole story on a 25-year-old home.
The Three Measurements That Matter (and the Mistake We See Most)
The single most common Henderson mistake is measuring once, in one spot. On a home with decades of thermal cycling, out-of-square openings are the rule, not the exception. If your width reads 47 1/4 inches at the top and 46 7/8 at the bottom, you size to 46 7/8, not the average and certainly not the first number. The replacement has to fit the smallest dimension, with a gap allowance on each side for shimming and sealant so the unit seats true and the sealant has somewhere to live.
Henderson’s climate puts extra weight on this. Summer highs well above 100°F stress stucco and sealants hard, and that cycling is exactly what racks an opening out of square over time. A window sized to the largest reading will bind or leave a gap that lets in heat and dust. We spec to the smallest opening, every time, because we’d rather shim a hair more than pull a unit that won’t close.
The nine-measurement habit
Our pre-installation measure takes nine readings per opening – three per dimension – and documents the stucco condition and flashing integrity alongside them. Those numbers spec the Andersen or Marvin unit, so the window ordered is the window that fits. Our technicians have up to 12 years of experience reading openings exactly like these. When you’re ready to move from measuring to replacing, our Windows & Doors team handles the spec, the order, and the install under one roof.

What About the HOA Submittal on a Henderson Replacement?
You need exterior elevation dimensions, not just the unit size. Green Valley and Anthem design-review committees want submittal drawings that show how the new window looks from the street – exterior frame dimensions, trim profile, color – so the review board can judge a match against your home’s elevation. If your tape only captured the interior rough opening, the submittal gets kicked back and the project stalls.
City of Henderson permitting overlays and HOA design review go hand in hand on aging-but-not-old housing stock. That’s why measuring for a Henderson replacement means capturing two things at once: the rough opening for the installer, and the exterior frame dimensions and color-match details for the submittal. Measure once for both, or you’ll be back on a ladder. Our Henderson service area team handles both sides of that paperwork routinely.
How Much Does a Henderson Window Replacement Cost?
Replacement window jobs in Henderson typically run $4,500 to $15,000 for a whole-home project, while impact window installation – which more homeowners here ask about given the desert wind and dust – runs $8,000 to $25,000. Exact cost depends on unit count, material, and whether flashing or stucco repair is part of the scope.
| Scope | Typical Henderson Range |
|---|---|
| Window replacement (whole-home) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
We keep pricing upfront and no surprises – the number you see is the number you pay. Large projects over $10,000 get $1,000 off, and 0% financing for 18 months spreads the rest out. Every install is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space: if it’s not done right, we make it right.
When to Stop Measuring and Call a Pro
If your opening readings vary by more than about a quarter inch, if the stucco return is cracked or soft, or if you’re ordering flanged Andersen or Marvin units for a stucco wall, measuring is where the job gets complicated – and mis-ordering a unit is a costly, non-returnable mistake. Our background-checked, uniformed technicians take the nine measurements, document stucco and flashing, and spec the unit so it fits. Calls reach a live person 24/7, and you get a free project estimate and design consult before anything is ordered.
For the full scope of what we handle from foundation to finish line, start at our home. If you’re weighing a kitchen or bath refresh at the same time – think Delta or American Standard fixtures while the walls are open – we price those alongside window work so the schedule lines up.
FAQs
You can capture the daylight opening yourself, but on a Henderson stucco home that number is the wrong one to order from. The rough opening behind the stucco return is what counts, and it takes probing at the interior drywall reveal plus three readings per dimension. Call (844) 320-6757 for a free estimate – we measure it right and spec the unit.
You measure the frame’s rough opening, not the glass. The stucco return around a Henderson window eats 1-2 inches per side, so the glass reading undersizes or oversizes the unit. Size to the smallest rough-opening reading with a shim and sealant gap on each side.
Because design-review committees in Green Valley and Anthem judge a match from the street, so submittals must include exterior elevation dimensions, trim profile, and color – not just the interior unit size. Call (844) 320-6757 and we’ll capture both sets of numbers in one visit.
Often yes. A 1990s stucco home has had two-plus decades of thermal cycling, and older units lose seal and let heat in. A full replacement typically runs $4,500 to $15,000 in Henderson, backed by our 730-Day Done Right Promise.
If you’d rather have it looked at, Groundwork Construction Co. of Henderson offers a no-pressure assessment in Henderson – call (844) 320-6757 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of Henderson, serving Henderson, NV.


