







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Custom Windows Are Made for Henderson, NV Homes (and Why the Glass Spec Matters More Than the Frame)
Custom windows are made in sequence: the rough opening is measured, the frame profile and dimensions are specified, the insulating glass unit (IGU) is built to a chosen solar heat gain coefficient (SHGC) and U-factor, gas fill and a warm-edge spacer go in, the frame gets assembled around that glass, and a nailing flange is configured for the wall assembly. In Henderson, the single most consequential step in that sequence is the glazing spec. A glass package tuned for a Seattle climate will bake your living room every July and August. Groundwork Construction Co. of Henderson works directly with Andersen and Marvin to lock the SHGC and flange profile before manufacturing starts. Call (844) 320-6757 for a free window assessment.

The manufacturing sequence, step by step, with a desert lens
The order of operations doesn’t change much between factories. What changes is where the decisions get made and who makes them. Here’s how a custom unit actually comes together, and where a Henderson order tends to go sideways.
- Rough opening measurement. Someone has to measure the framed hole in your wall, not the old window. In the 1990s stucco tract homes across Green Valley, openings rarely match modern standard sizes after 30 years of frame movement and stucco settlement. A custom order that starts from the wrong number is a custom order that gets rebuilt.
- Frame size and profile spec. Frame depth has to clear your wall assembly. Stucco adds thickness that a wood-frame spec sheet doesn’t account for.
- Glazing unit selection. This is where SHGC gets chosen. Low-E coatings are tuned either to reject solar heat or to hold heat in. Henderson needs the first kind, and the specific coating matters more than the marketing label on the glass.
- Spacer and gas fill. Argon or krypton between the panes, plus a warm-edge spacer to cut condensation at the edges.
- Factory assembly. The IGU is sealed, the frame is assembled around it, hardware is set, and the unit is tested before it ships.
- Flange and fin configuration. The nailing fin profile is what lets the window integrate with stucco and Z-flashing. Get this wrong and you’re caulking a leak forever.
Why the glazing package is the decision that actually matters in Henderson
Here’s the part most homeowners never see: the IGU is built and sealed before the frame is ever assembled. By the time anyone sees a window, the glass spec is locked. In Henderson, summer highs push well past 100°F for months, and west-facing glass in an Anthem or Seven Hills home takes direct sun through the worst of it. If the SHGC was specified for a mild climate, you’ll feel it on your electric bill every month for the life of the window.
U-factor gets all the attention because it’s the number on the sticker. SHGC is the one that decides whether your AC runs an extra hour in August. A low-E coating tuned for solar gain rejection is the difference between a window that works in Henderson and one that just looks like it does.

Standard sizing versus custom configurations, and where Andersen and Marvin differ
Custom sizing means the factory builds to your non-standard rough opening dimensions. Custom configuration means you’re changing the operation, the grid pattern, the hardware, or the glass spec. Both brands do both, but the spec conversation that matters in Henderson is about matching a 1990s stucco opening that hasn’t been standard since the day it was framed.
Groundwork works with Andersen and Marvin on the spec side, which means the SHGC, flange profile, and frame depth get confirmed before the order leaves for manufacturing. That’s the whole point. Those details shouldn’t surface as a surprise when a crew is standing in your yard with a window that doesn’t fit the opening.
The stucco flange detail that factory-standard windows miss
Most standard window orders are built for wood-frame homes with siding. A Henderson stucco install needs different fin geometry: a Z-flashing-compatible profile and enough flange depth to clear the stucco layer and the weather barrier behind it. That’s a manufacturing spec, not an installation fix. It gets baked into the order or it doesn’t get fixed later.
This is why we push the flange conversation early. A window that fits the opening but has the wrong fin profile means water finds a path in, and in a monsoon season dumping rain off the McCullough Range foothills, water finds cracks fast. For the full scope of what we handle on window and door projects across the valley, see our Windows & Doors page.
Common local scenarios we run into in Henderson
Most window orders here fall into a few recognizable patterns. Knowing which one you’re in shapes the spec conversation before anyone measures.
- The 1990s Green Valley tract home with a failed original window. Openings have moved. The original single-pane or early dual-pane units are at end of life. Custom sizing is usually unavoidable.
- A Seven Hills or Anthem semi-custom build facing west. The original glass spec wasn’t tuned for solar heat gain. The fix is a glazing upgrade, and the frame size often stays standard.
- A room addition or ADU tie-in. New openings have to match the existing stucco and flashing detail so the addition doesn’t read as an afterthought.
- A mid-2010s home with one failed IGU. The frame is fine. The sealed unit is the problem. Sometimes the right custom order is glass only.
Key Takeaways
- The IGU is built to spec before the frame is assembled, so the SHGC decision is locked in early.
- Henderson needs low-E coatings tuned for solar gain rejection, not just a good U-factor.
- Stucco installs require a Z-flashing-compatible fin profile and enough flange depth, which is a manufacturing spec.
- Groundwork Construction Co. of Henderson works directly with Andersen and Marvin so the spec is confirmed before the order is placed, not discovered on install day.
What custom window orders cost in Henderson
Pricing depends on the size of the opening, the glass spec, and how many units are involved. Here’s what we typically see for Henderson window work:
| Project | Typical Range |
|---|---|
| Window Replacement | $4,500-$15,000 |
| Impact Window Installation | $8,000-$25,000 |
For a full-home order, the glazing spec is often the difference between the low and high end of that range. Upfront pricing means the number you see is the number you pay, and every project is backed by the 730-Day Done Right Promise. Financing at 0% for 18 months is available, along with $1,000 off projects over $10,000.
FAQs
Custom orders typically take several weeks from the day the spec is finalized, since the IGU and frame are both built to your dimensions. Lead time depends on the brand and how complex the glazing package is. Start the measurement early so the spec conversation isn’t rushed.
In most cases, yes. Matching existing window profiles in 1990s stucco homes means confirming the frame depth and flange profile first, then matching the glass spec. That’s the process we run through with Andersen and Marvin before the order goes out. Call (844) 320-6757 for a free estimate so we can confirm what’s on your wall.
For most Henderson homes, you want a low-E coating tuned for solar gain rejection as the priority, with a reasonable U-factor as the secondary spec. The IGU is sealed before the frame is assembled, so that decision has to be made at the order stage. Our technicians have up to 12 years of experience with desert glazing specs and will walk you through the tradeoffs.
Yes. Stucco installation requires a Z-flashing-compatible fin profile and enough flange depth to clear the stucco layer, and we confirm that on the manufacturing spec before the window ships. When the flashing detail is part of the order, the install is dialed in from the start. Groundwork Construction Co. of Henderson works across Henderson and the surrounding valley, and every order is covered by the 730-Day Done Right Promise.
If a window order is on your list this year, the spec conversation is where it starts. Groundwork Construction Co. of Henderson works with you on the glazing, flange profile, and frame depth before anything gets manufactured, and calls are answered by a live person 24/7. Call (844) 320-6757 for a free estimate.
Written by the team at Groundwork Construction Co. of Henderson, serving Henderson, NV.


