







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterNew Construction Windows vs Replacement Windows in Henderson, NV
For most Henderson homes, replacement windows are the right call - not because they’re cheaper, but because your stucco opening was never built to accept a nailing-flange window without demolition. Choose replacement windows unless you’re adding on, re-stuccoing an entire elevation, or repairing structural framing. In those cases, a new-construction window is correct - and only when the installer knows how to flash a stucco wrap for monsoon country. Most jobs come in well within the standard Windows & Doors range. Call (844) 320-6757 for a free, no-pressure assessment.
Here’s the part most comparison pages skip: in Henderson’s stucco-clad tract homes, choosing new-construction windows over replacement windows isn’t a performance upgrade. It’s a waterproofing liability if the installer doesn’t know how to flash a stucco wrap in a climate that drops an inch of rain in an afternoon.
Key Takeaways
- Replacement windows reuse the existing opening and are right for roughly 85% of Henderson remodels.
- New-construction windows use a nailing fin that bonds to the rough opening - which means demo and re-stucco on an existing wall.
- A poorly flashed new-construction re-install in a stucco wall can wick monsoon water behind the wall for months before you see damage.
- New-construction windows make sense for additions, structural repairs, and full re-stucco projects.
- Either way, Groundwork covers the installation with the 730-Day Done Right Promise.

What actually separates a new-construction window from a replacement window?
The difference is mechanical, not cosmetic. A new-construction window carries a continuous nailing fin around its perimeter. That fin gets nailed or screwed to the rough opening framing before siding, stucco, or trim goes on, so the wall assembly is built out and around the window. In an existing Henderson home, that means cutting back the stucco, trimming the opening, and re-stuccoing after the window is set. A replacement window (often called a retrofit or insert window) has no bulky fin. It slides into your existing frame and fastens through the jamb, then gets sealed and trimmed. No stucco is touched.
That single difference drives the entire decision. New-construction windows can deliver a tighter, better-integrated envelope - when the wall is open. Replacement windows keep the stucco, the water-resistive barrier, and the flashing you already have intact - which in a 1990s-era stucco home is usually the safer bet.
Why the stucco opening decides it in Henderson
Henderson was built out mostly during the 1990s-2000s boom, so Green Valley, Anthem, and Seven Hills are dominated by stucco-and-tile tract homes, with a smaller pocket of older ranch homes near Water Street downtown. When you pull a window out of a 25-year-old stucco wall, you don’t get a clean rough opening. You get a fiber-cement or three-coat stucco edge, a lath layer, and a house wrap that’s been sun-baked and thermally cycled through 100°F-plus summers for two decades. Getting a new nailing fin properly integrated into that assembly takes a careful flashing detail - sill pan, back dam, taped flanges, weep screed continuity - and a paper trail that shows it was done.
Do it wrong and the failure is quiet. Monsoon-season flash flooding off the McCullough Range foothills drives rain sideways against the walls. Water that gets behind a poorly flashed window doesn’t announce itself. It works through the sheathing and the framing for months before you notice a soft sill, bubbling paint, or a stain on the interior drywall. By then you’re into repairs no window warranty will cover.
Replacement windows sidestep that whole problem. The original stucco, flashing, and water-resistive barrier stay in place; the retrofit unit fits inside the frame and seals at the jamb. For a stucco home that isn’t being re-sided, that’s the lower-risk path.

Side-by-side: which window type fits your Henderson project?
| Factor | Replacement window | New-construction window |
|---|---|---|
| Attachment | Retrofit frame inside existing jamb | Nailing fin to rough opening framing |
| Stucco work | None | Cut back and re-stucco required |
| Waterproofing risk | Low - original envelope stays intact | High if flashing is rushed |
| Glass area lost | Slight (frame stacks) | None |
| Typical cost (per project) | $4,500-$15,000 | Higher once demo and re-stucco are in |
| Best for | Existing stucco homes, 85% of remodels | Additions, structural repair, full re-stucco |
Window replacement in Henderson runs $4,500-$15,000 for a typical project, and impact window installation runs $8,000-$25,000 where impact-rated glass is specified. Those ranges assume replacement windows on an intact stucco wall. New-construction windows add stucco demolition and re-stucco on top, which is the number most bids conveniently leave out.
When new-construction windows are actually the right answer
Replacement windows win most of the time, but not all of the time. There are three cases where a new-construction window is the correct spec - and where cutting a corner with a retrofit unit would be a mistake.
- Home additions and ADUs. A new wall is being framed from scratch, so there’s no existing opening to work with. The nailing fin goes on before the stucco, exactly as it should. Groundwork runs additions and ADU builds under the same contract as the windows, so the envelope and the opening come from one scope of work. Typical home additions run $45,000-$130,000, and ADU construction runs $90,000-$220,000.
- Structural repairs around the opening. If the framing, header, or sheathing around a window is compromised - water damage, settling, or a botched prior install - the wall has to come open anyway. Once it’s open, a new-construction window is the cleaner result.
- Full exterior re-stucco projects. If the stucco is coming off the elevation, the window openings are exposed. Specifying new-construction windows at that moment costs almost nothing extra and gives you a properly integrated assembly.
This is where a full-scope builder earns its keep. Groundwork Construction Co. of Henderson handles the window, the stucco, the flashing, and the framing as one scope - so you’re not caught between a window installer and a stucco crew pointing at each other when something leaks. If you’re weighing an exterior project, the Henderson service area page lays out what we handle across the valley.
What we look for before we recommend either option
We don’t quote a window type until we’ve walked the opening. There are a few things that decide it, and homeowners can check them too.
- Stucco condition at the perimeter. Cracks, hollow spots, or a failing weep screed change the plan. If the stucco is failing, a replacement window still works, but the flashing detail has to be handled in that same visit.
- Existing flashing and house wrap. We probe the sill and look for the water-resistive barrier behind the stucco. If it’s degraded, we plan for repair before the window goes in.
- Frame square and rot. A soft or out-of-square frame rules out a retrofit unit.
- Whether the elevation is being re-stuccoed anyway. If the answer is yes, new-construction becomes the smart spec.
- Slope and drainage at the wall base. On the sloped lots in Seven Hills and Anthem, water sheds fast. We check that the sill and the grade below it will drain properly.
Brand matters too. We specify Andersen and Pella for their proven frame and glass performance, and they hold up to Henderson’s thermal cycling. Whichever type you choose, the installation is what fails or lasts, and that’s what the 730-Day Done Right Promise covers: if it’s not done right, we make it right.
FAQs
Repair is cheaper when the problem is isolated - a broken pane, a failed seal, or a stuck sash, which often runs in the low hundreds. Replacement becomes the better value when the frame, glass seal, or flashing has failed across multiple windows, since the full project lands in the $4,500-$15,000 range. A free assessment will tell you which side of that line you’re on. Call (844) 320-6757.
Yes, but it requires cutting back the stucco, building the flashing detail correctly, and re-stuccoing - which is why we generally steer existing stucco homes toward replacement windows unless the wall is already open. When it’s done, the flashing has to be right for monsoon rain. Call us for a straight answer on your specific wall.
They’re usually the best fit, because the original stucco and flashing stay intact and the retrofit unit seals inside the existing frame. In Green Valley and similar master-planned tracts, that’s how we handle the large majority of window projects. Upfront pricing means the number you see is the number you pay - call (844) 320-6757 for an exact quote.
Most replacement window projects are completed in a single visit, and calls are answered by a live person 24/7 so you’re never stuck waiting until Monday. New-construction windows take longer because of stucco demolition and re-stucco. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Call today to schedule.
If you’d rather have it looked at, Groundwork Construction Co. of Henderson offers a no-pressure assessment in Henderson. We’ll tell you which window type your wall actually supports, price it upfront, and back the install with the 730-Day Done Right Promise. Call (844) 320-6757 for a free estimate.
Written by the team at Groundwork Construction Co. of Henderson, serving Henderson, NV.


