







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Henderson Homeowners Choose Toto Construction
Groundwork Construction Co. of Henderson provides independent Toto construction and installation service in Henderson, NV – setting, connecting, and rebuilding around Toto fixtures as part of bathroom remodeling and renovation work. We’re not affiliated with or authorized by Toto, and we don’t service under any manufacturer program. What we bring is a remodeling crew that plans every Toto install against the real conditions here: hard water, slab floors, and valve rough-in depths that many out-of-town installers get wrong. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise. Call (844) 320-6757 for a free estimate.
Why Trust Groundwork Construction Co. of Henderson for Your Toto Construction?

Our technicians know the Toto lineup by model, not by category. That means they understand the difference between a Drake CST743 two-piece and a Drake II CST454, why the EcoPromenade and Promenade one-piece models seat differently on a flange, and how the Aquia dual-flush – including the IV wall-hung – carries its fill and flush mechanisms in a body that leaves you almost no room to work if something’s misaligned.
We use OEM-compatible parts where fit and flow are engineered to the bowl: fill valves, flush towers, and wax or foam gaskets. We confirm flange height, supply condition, and valve stop before any Toto fixture goes in. None of that voids your warranty; careless installation and mismatched parts do. We also build bathroom remodels around a Toto install you already own, from walk-in showers to vanity work, so your fixture lands on a floor and wall built to receive it. Upfront pricing, no surprises – the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Henderson
Most of what we see with Toto fixtures in Henderson traces back to water chemistry and slab construction. Five issues come up more than any others.
- Fill and flush valve wear on the Drake tower fill valve. Henderson’s hard water scales the tower-style fill valve, and the toilet starts running intermittently or flushing weak. Aftermarket fill valves often don’t match the OEM seat geometry, so a cheap swap can leave you with a slow leak you can’t see.
- Wax ring and flange leaks at the closet flange. This is a classic slab-plumbing failure. When the flange sits below the finished tile – common after a previous remodel – the Toto’s outlet throat doesn’t seal properly, and wastewater escapes under the floor. It’s the leak nobody notices until the smell shows up.
- Washlet seat failures. The inlet screens clog with scale, seat hinges crack, and control boards fail on older S-series units after years of hard-water exposure. A Washlet that stops heating or washing is usually a scale or board issue, not a whole-unit problem.
- Tank-to-bowl gasket seepage on two-piece models. Repeated thermal cycling in a hot, garage-adjacent bathroom loosens tank bolts and hardens the gasket. You’ll see water at the back of the bowl or a slow drip down the base.
- Aquia dual-flush running constantly. The Aquia’s fill and flush assembly has tight tolerances, and scale or a worn seal throws off the dual-flush balance. The fix is usually a rebuild, not a new toilet – if the body’s sound.
Toto Parts & Our Repair-vs-Replace Approach

We source Toto parts per job rather than stocking them locally, because the right part depends on the exact model and what failed. OEM Toto fill valves, flush towers, and wax or foam gaskets are worth the small premium – they’re engineered to the bowl’s fit and flow. Quality aftermarket is fine for supply lines, angle stops, and shutoff valves, where brand rarely matters.
If the fixture body, bowl, and trapway are sound, we rebuild. If the bowl or trapway is cracked, or the closet flange is failing in a slab, replacement is the honest call. We won’t chase a repair that won’t hold. Call (844) 320-6757 to talk through what you’re seeing – estimates are free.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the tank, inspect the fill valve, flush tower, and seals, and check flange height and wax ring condition against the finished floor. For Washlets, we test inlet screens and the control board.
- 2
Repair or install. We rebuild with OEM-compatible components, or set a new Toto fixture on a properly seated gasket and flange. In a full bath scope, we handle any shower or vanity work the project needs.
- 3
Test. We confirm the flush cycle, check for seeps at the base and tank, verify the valve stop and supply, and run the Washlet through a full cycle if one’s installed.
- 4
Warranty. Every job closes under our 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person, 24/7.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Henderson

We work across the Toto lines Henderson homeowners actually own and buy: Drake and Drake II two-piece toilets (CST743 and CST454 series), EcoPromenade and Promenade one-piece models, and the Aquia dual-flush family, including the IV wall-hung. On the bidet-seat side, we handle Washlet and Washlet+ seats across the S-series and C-series.
Most of these show up here as part of a bathroom remodel – a walk-in shower install or a vanity upgrade that gives you a reason to reset the toilet too. We plan the install to the model, not to whatever’s on the truck. From foundation to finish line.
We Also Service These Brands
Toto isn’t the only brand we work around. We’re a multi-brand construction partner, so a bathroom remodel that pairs Toto fixtures with KraftMaid cabinetry or Kohler fittings is business as usual. Roofing clients land on GAF systems, and window and door projects run on PGT frames. You don’t need a different contractor for every brand in the house.
FAQs – Toto Construction Service in Henderson
Is Groundwork Construction Co. of Henderson authorized by Toto? No. We’re an independent Toto construction provider – we set, connect, and rebuild around Toto fixtures as part of remodeling work, but we are not affiliated with or authorized by Toto and don’t service under any manufacturer program.
Do you use genuine Toto/OEM parts? For fill valves, flush towers, and gaskets, yes – we use OEM-compatible Toto parts because the fit and flow are engineered to the bowl. For supply lines, angle stops, and shutoff valves, quality aftermarket parts are fine.
How long does Toto service take? A fill valve or flush tower rebuild is often a single visit. A flange repair on a slab or a full fixture reset takes longer once we see what’s under the finished floor. A bathroom remodel with a Toto install lands in the several-week range depending on scope. Call (844) 320-6757 for an estimate on your project.
What Toto models/series do you cover? Drake and Drake II (CST743 and CST454), EcoPromenade and Promenade one-piece, the Aquia dual-flush family including the IV wall-hung, and Washlet/Washlet+ seats across the S-series and C-series.
Will service void my Toto warranty? Not when it’s done right. OEM-compatible parts and correct flange and gasket practice protect the fixture. Mismatched aftermarket fill valves and improper resets are what cause problems. We follow the installation standards Toto specs.
How much does Toto construction cost in Henderson? It depends on scope. A fixture rebuild is far less than a new install, and a full bathroom remodel that includes a Toto reset runs a wider range. Here’s our line-item pricing:
| Project | Typical Range (Henderson) |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (844) 320-6757 for an exact quote – estimates are free, and pricing is upfront with no surprises.
Book Your Toto Service in Henderson, NV
If your Toto Drake is running, your Washlet’s stopped heating, or you’re planning a Henderson bathroom remodel and want the fixture done right, call Groundwork Construction Co. of Henderson at (844) 320-6757. Free estimates, upfront pricing, and a 730-Day Done Right Promise on every job. Live person, 24/7.
Written by the team at Groundwork Construction Co.












