







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Henderson Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Henderson, NV: cabinet installation, refacing, full kitchen remodeling, and the repairs that KraftMaid cabinetry eventually needs in a desert climate. What makes our KraftMaid work different is that we are not a dealer. We’re an independent construction firm that has fitted KraftMaid lines into Henderson homes for years, which means we solve the real installation and wear problems those cabinets develop instead of selling you a replacement set.
One note up front, because it matters: Groundwork Construction Co. of Henderson is not affiliated with, authorized by, or sponsored by KraftMaid. We’re an independent KraftMaid service provider. Our technicians have up to 12 years of experience with cabinet installation and repair, and every KraftMaid project we take on is covered by our 730-Day Done Right Promise. If the work isn’t right, we make it right.
Call (844) 320-6757 and a live person answers, any hour, any day. No voicemail, no waiting for Monday.
Why Trust Groundwork Construction Co. of Henderson for Your KraftMaid Construction?

KraftMaid cabinets look simple. They’re not. The Vantage and Momentum lines use different box construction, hinge plates, and glide systems than the Portrait Series or the Cholla Maple doors, and a technician who treats them all the same will strip a screw hole or misalign a door before lunch.
Our technicians know the differences. They know which KraftMaid hinges accept a repair plate versus a longer screw, which side-mount glides have an OEM soft-close equivalent, and where a cabinet door will crack if it’s over-tightened onto a particleboard core. That familiarity is what keeps a repair clean instead of turning a $40 hinge job into a $400 door replacement.
Parts handling matters too. We source OEM KraftMaid replacement doors, drawers, and hardware whenever those parts are available, so the color and fit match what’s already in your kitchen. When OEM parts are discontinued or priced out of reason, we use high-quality aftermarket glides and hinges that meet or beat the original spec. We don’t claim to stock KraftMaid parts locally. Every part is sourced for your specific job, which is also how we avoid the mismatch that comes from grabbing a generic hinge off a shelf.
And every bit of it stays warranty-safe. Our service approach is built to preserve your KraftMaid warranty rather than quietly void it. Background-checked, uniformed technicians handle every job, pricing is upfront with no change orders once work starts, and our own 730-Day Done Right Promise sits on top of it all.
That’s the difference between hiring a cabinet installer and hiring a construction firm that does cabinets. From foundation to finish line, one contractor, one written scope, one number you can plan around.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Henderson
These are the KraftMaid issues we see most in Henderson. They’re not manufacturing defects, and they’re not your fault. They’re what happens to cabinet hardware and finish after eight to fifteen years of daily use in a dry, hot climate.
- Door hinge screw pull-out in Vantage and Momentum lines. The door cores in these series are particleboard, and particleboard doesn’t hold a screw the way solid wood does. Every slam and every lean on an open door widens the hole slightly. Eventually the screw spins and the door sags or won’t stay closed. The fix is usually a longer screw or a hinge repair plate, but only after we check that the hinge itself isn’t bent.
- Drawer glide failure from overloaded drawers or worn nylon rollers. Standard side-mount glides in KraftMaid’s entry and mid lines use nylon rollers that flatten and wear with age. Add a drawer full of cast iron and the glide bends. You feel it as a drawer that sticks halfway, or one that drops when you pull it out.
- Finish cracking and peeling at the joints on painted and stained maple doors. This one is specific to Henderson’s climate. Maple moves with humidity, and desert air is dry nearly year-round. The wood shrinks, the finish doesn’t, and hairline cracks open along the stiles and rails. Cholla Maple doors show it first at the center panel joint. A tight house with forced air moves the process along faster.
- Soft-close mechanism failure in upgraded hinges and glides. Soft-close hardware has a fluid damper inside. Under constant use, and in a house that swings between 65°F inside and 110°F outside, the damper loses its resistance. The door starts slamming again, which is exactly what the upgrade was supposed to stop. Replacing the damper or the hinge restores it.
- Sagging shelves and separating cabinet boxes. Heavy stoneware and stacked pots push past what a fixed shelf was rated for. We reinforce the shelf and the box rather than replacing the cabinet, which is almost always the cheaper and better call.
Here’s the pattern a lot of Henderson homeowners describe. A KraftMaid Vantage door stops staying closed, or a drawer starts sticking. The usual cause is stripped hinge screws or worn drawer glides after years of use in dry air. A qualified installer replaces the hinge with a longer screw or a repair plate, swaps the glide for an OEM or heavy-duty aftermarket unit, then checks that the door is square and the drawer runs without binding. That’s a repair, not a remodel, and the two shouldn’t be priced the same.
KraftMaid Parts & Our Repair-vs-Replace Approach

We source OEM KraftMaid replacement doors, drawer fronts, and hardware whenever those parts are still available. OEM keeps the color and profile exact, which matters in a kitchen where a slightly different white or maple tone will read as a mistake from across the room. When OEM parts are discontinued or cost more than the cabinet is worth, we move to high-quality aftermarket glides and hinges that meet the original spec.
The repair-or-replace question gets an honest answer, not a sales pitch. One stripped hinge is a repair. Two or three failing hinges across a Vantage run is still usually a repair. Widespread finish failure across twelve doors, or a mix of broken hinges and blown glides on most of a Momentum kitchen, tips the other way, because piecemeal repairs start costing more than a clean door and drawer replacement. We price both options and tell you which one we’d choose in your spot.
Structural issues like sagging shelves or separating boxes get reinforced, not replaced. There’s no good reason to throw out a sound cabinet because one shelf lost its span.
Want a straight answer on your own cabinets? Call (844) 320-6757 for a free estimate and we’ll tell you what we see.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every door and drawer in question, check hinge plates and screw holes, pull the glides, and inspect the finish at the joints. For a KraftMaid kitchen, we note which series each cabinet belongs to, because the repair approach changes between Vantage, Momentum, and Portrait.
- 2
Written scope and pricing. You get a line-item quote before anything is ordered. If we’re replacing a door, the price includes the OEM part. If we’re reinforcing a shelf, that’s a line too. No change orders once work starts, and 0% financing for 18 months plus ol,000 off projects over ol0,000 if the job grows into a full kitchen remodel.
- 3
Repair or install. Repairs are done with the right fastener for the cabinet core, never a screw that splits particleboard. New KraftMaid installation includes leveling the boxes, shimming to the wall, scribing fillers, and hanging doors with even reveals. We pull the City of Henderson permits where the scope requires them, and HOA design review in Green Valley or Anthem gets handled before we schedule.
- 4
Test. Every door swings and closes without rubbing. Every drawer runs full-length without binding. Soft-close hardware gets cycled by hand so we know the dampers are working, not just installed.
- 5
Warranty and walkthrough. We walk the kitchen with you, show you what was replaced, and hand over the written terms. Every KraftMaid project is backstopped by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Henderson

We work on the KraftMaid lines that show up most in Henderson homes: the Vantage Series and Momentum Series, which cover most of the builder and mid-range cabinetry in Green Valley and Seven Hills, plus the Portrait Series and Cholla Maple doors found in higher-end remodels around Anthem.
That covers full cabinet installation and refacing, complete kitchen remodeling with countertops and backsplash, and kitchen design and layout work when a Henderson homeowner is rethinking the whole room. Cabinet installation in Henderson runs $4,000 to $13,000; a full kitchen remodel runs $14,000 to $45,000; adding a backsplash runs $800 to $2,500. We don’t claim to stock KraftMaid locally. Each cabinet and part is ordered and fitted to your job.
We Also Service These Brands
KraftMaid is one brand in a larger portfolio. We also work with Kohler in baths and plumbing fixtures, GAF roofing systems, PGT windows and doors, and Master Halco fencing. That matters when a kitchen remodel turns into a wider project. One contractor handles the cabinets, the countertops, and the scope around them instead of you coordinating three trades and hoping they show up on the same week.
FAQs – KraftMaid Construction Service in Henderson
No. We are an independent KraftMaid service provider and have no affiliation with, authorization from, or sponsorship by KraftMaid. Our expertise comes from years of installing and repairing KraftMaid lines in Henderson homes, not from a dealer agreement. Call (844) 320-6757 if you want that work scoped for your kitchen.
Yes, whenever OEM KraftMaid doors, drawers, and hardware are available. OEM keeps the color and fit exact. When a part is discontinued or priced beyond what makes sense for the repair, we use high-quality aftermarket glides and hinges that meet the original spec and tell you so on the quote. Call (844) 320-6757 for a free estimate.
A hinge or glide repair is typically done in a single visit. A door or drawer replacement runs longer because the OEM part has to be ordered and color-matched, usually a few weeks from quote to install. A full KraftMaid cabinet installation or kitchen remodel in Henderson takes weeks, not days, and the schedule is written into your scope before work begins.
We cover the Vantage Series, Momentum Series, Portrait Series, and Cholla Maple doors, along with the hinges, glides, and finish work on those lines. If you’re not sure which series you have, we identify it during diagnosis. Call (844) 320-6757 and we’ll take a look.
Not when it’s done correctly. Our approach is built to be warranty-safe: OEM parts where available, correct fasteners for the cabinet core, and no modification that changes the cabinet’s structure. We’ll flag anything in your specific situation that could affect a manufacturer claim before we touch it. Call (844) 320-6757 for an exact quote. Estimates are free.
Cabinet installation in Henderson runs $4,000 to $13,000, a full kitchen remodel runs $14,000 to $45,000, and backsplash installation runs $800 to $2,500. Targeted repairs like a hinge or glide fix sit far below those numbers. The number you see is the number you pay, and projects over $10,000 qualify for $1,000 off with 0% financing for 18 months. Call (844) 320-6757 for a free estimate.
Book Your KraftMaid Service in Henderson, NV
Whether you need a stripped hinge fixed, a whole Vantage kitchen refaced, or a KraftMaid kitchen designed from the studs out, we’ll scope it in writing and back it with the 730-Day Done Right Promise. Calls are answered by a live person, 24/7. Call (844) 320-6757 to schedule your free estimate and design consult in Henderson.
Written by the team at Groundwork Construction Co. of Henderson.












