







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Enterprise, NV: What It Takes and What It Costs
Concrete driveways and concrete work in Enterprise, NV typically run $4,500 – $12,000 for a full driveway installation, with most single-family jobs landing between $6,000 and $9,000. Figure three to five working days from demo to the day you can park on it, plus a 7-day curing window before you drive a heavy vehicle on the slab. Call (844) 320-6757 for a free on-site estimate with a written line-item quote before any concrete is cut.
How a concrete pour actually goes, day by day

Concrete is unforgiving. Once it sets, mistakes live in the slab. That’s why we walk every job in the same order, and why we don’t skip steps to shave time off the schedule. Here’s what the week looks like.
Day 1: Layout, demo, and the underground check
We mark the pour boundaries with string and paint so you can see the shape and slope before anything is broken. Then the old surface comes out, along with any failing base. On 89139 lots, the equipment often hits caliche and hardpan eighteen inches down. Rock-breaking adds time and cost, and we flag it during the estimate rather than surprise you mid-job.
Day 1 – 2: Base prep and grading
Crushed aggregate base goes down in lifts and gets compacted, not dumped and smoothed. Slope matters here. Enterprise sits where monsoon flash flooding funnels across a valley that stays dry most of the year, so we grade a minimum two percent away from the foundation and confirm the drainage path before forms go in. This is the stage where we ask you where you want runoff to go, because once the slab is poured you don’t get a redo.
Day 2 – 3: Forms, steel, and inspection
Forms set the shape and the pitch. Rebar or mesh goes in on chairs so it sits mid-slab instead of bottoming out. If your project touches the right-of-way or alters drainage, we pull the required permit and hold the inspection before the pour. You sign off on layout, thickness, and finish at this point. After concrete goes in, those choices are locked.
Day 3 – 4: The pour and the finish
We pour early. Summer highs in Enterprise push well past 100°F, and concrete placed at midday sets too fast to finish cleanly. Crews start at first light. You choose your finish at the estimate stage: broom, exposed aggregate, or saw-cut pattern. Broom is the default for a reason. It grips wet shoes and stays walkable through UV-heavy decades.
Day 4 – 5 and after: Curing and joint cuts
Control joints get cut within 24 hours, because concrete always cracks and the joint decides where. We keep light foot traffic off for 24 to 48 hours and hold vehicles off for seven days. Full strength takes about 28 days. At the final walkthrough we go over the surface together, and the whole job stays covered under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that decide how your slab looks in ten years
Concrete isn’t one product. You’re picking thickness, mix, reinforcement, finish, and joint layout, and each one trades cost against lifespan.
- Standard 4-inch slab: Fine for a car and light truck. Cheapest path and the one most Enterprise tract homes were built with. It won’t hold up to a loaded trailer or an RV, so be honest about what parks there.
- 5- to 6-inch with rebar: Adds roughly 15 – 25% to material and steel cost. Worth it for heavy vehicles, steep aprons, or a driveway that doubles as a turnaround for work trucks.
- Broom finish: The standard texture, best grip when wet, and the easiest to maintain. Pricing sits at the low end of our range.
- Exposed aggregate: Pebble surface that hides tire marks and holds up under full desert sun. Rough on bare feet and harder to shovel in the rare snow that reaches the valley edge.
- Fibermesh vs. mesh vs. rebar: Fibermesh slows hairline shrinkage cracks but doesn’t carry load. Rebar at the right spacing is the real structural answer.
- Sealer: A penetrating sealer every two to three years slows UV fading and blocks staining. Skipping it in Enterprise’s sun is how a slab greys out in a decade.
- Integral color: A tone mixed through the concrete rather than painted on top. It costs more up front and never peels.
If your project grows past the driveway into a full driveway and hardscape plan, that’s handled under Driveway & Pavers, and we scope it in a single written estimate so the concrete and the surrounding surfaces work together.
What concrete driveways and concrete work cost in Enterprise, NV

Expect $4,500 – $12,000 for a concrete driveway installation. A tear-out and replacement of an existing drive runs $5,000 – $14,000, since demo and haul-off add cost. Small flatwork like walkway sections or an apron repair often prices under the full-installation range. Call (844) 320-6757 and we’ll put exact numbers in writing after we see the site.
What pushes a job toward the high end:
- Square footage and thickness. A three-car drive at 6 inches costs far more in material than a single-car 4-inch pour.
- What’s under the surface. Caliche and hardpan demand rock-breaking. Soft or unstable fill demands over-excavation and more base.
- Access and haul-off. A tight side yard or a gate too narrow for equipment slows everything down and adds hand labor.
- Permits and inspection scope. Anything touching the right-of-way or drainage pattern adds review time and fees.
- Finish and reinforcement. Rebar, exposed aggregate, and integral color each add cost, and each buys years of service.
Every estimate is itemized: base prep, steel, thickness, finish, joint plan, and haul-off, each with its own line. Upfront pricing means the number you see is the number you pay. The only thing that changes it is a buried condition we couldn’t see before we broke ground, and we stop and talk before that work begins, not after.
See the difference
Before
After
Before
After
Before
AfterWhy Enterprise is a concrete town more than a repair town
Enterprise was built fast and built new. Most of the housing stock here came up from the 1990s through the 2020s as Mediterranean and Southwestern stucco-over-wood-frame homes with tile roofs on slab foundations. That changes what concrete work means here. In older valley neighborhoods, half the calls are repair. In Enterprise, the calls are new pours, room additions, patio covers, block walls, and xeriscape hardscape on raw desert lots. The lots off the south valley edge in 89139 routinely hide caliche just below grade, and grading has to account for sudden wash flooding in a city that gets almost no rain for ten months of the year.
HOA architectural review is the other reality. The master-planned subdivisions here commonly require sign-off on surface color, block-wall height, and anything visible from the street before a single form goes in, and we build that review time into the schedule instead of discovering it after you’ve signed. It’s why we advise homeowners to start that process while we’re still in the permitting stage. For bigger site work, homeowners often pair a driveway pour with ADU Site Prep & Utilities in Enterprise, since excavation and grading can be done once instead of twice.
If the wider project runs past the slab, it belongs under a full Driveway & Pavers in Enterprise scope, and we’ll quote both together. We handle this work across Enterprise and the surrounding south valley, and we’ve learned the local ground tells you what it’s going to cost before you dig.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: concrete driveways & concrete work in Enterprise

A standard driveway takes three to five working days to pour and finish, then seven days before you should park a vehicle on it and roughly 28 days to reach full strength. Monsoon-season rain can push a pour back a day or two, and we schedule around it rather than pouring into weather that ruins a finish. Call (844) 320-6757 for a schedule you can plan around.
You need a permit when the work touches the public right-of-way, changes drainage, or is part of a structural addition. Pure flatwork inside your own property often doesn’t require one, but HOA architectural review frequently does. We check the requirements for your specific lot and pull what’s needed. Estimates are free, and the answer comes with it.
All concrete cracks, but control joints decide where. We cut joints within 24 hours so the slab cracks along planned lines instead of across your driveway. Proper base compaction, correct steel, and joints at the right spacing are what keep cracks small and out of sight. Call (844) 320-6757 and we’ll walk you through the joint layout before we pour.
Concrete driveway installation in Enterprise runs $4,500 – $12,000, and replacement runs $5,000 – $14,000. The written estimate is itemized, and the number you see is the number you pay. If we hit caliche or an unexpected condition after demo, we stop and discuss the added cost before doing the work. No change orders on the back end.
Every concrete job we do is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right, and that’s backed in writing rather than in a pitch. Concrete is a long-horizon product, and the guarantee should match it. Call (844) 320-6757 to schedule your free estimate.
Get a written estimate on your concrete pour
We’ll come out, look at the lot, check the access and grade, and hand you a line-item quote for concrete driveways & concrete work in Enterprise with no guesswork and no pressure. Calls are answered by a live person, 24/7. Call (844) 320-6757, and we’ll put a real number in front of you.
Written by the team at Groundwork Construction Co. of Henderson.












