







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet refacing cost in Henderson, NV: what 1990s tract homes actually add to the bill
Expect to pay $14,000-$45,000 to reface a full kitchen in Henderson, with most single-family tract homes landing in the lower half of that band and larger Seven Hills or Anthem kitchens pushing toward the top. That range is wider than the national online averages you’ll find, and there’s a reason: a big share of Henderson’s housing was built in the 1990s and 2000s boom, and the cabinetry from that era has quirks that force custom work. Call (844) 320-6757 for an upfront, no-surprise quote. Live person, 24/7, and estimates are free.

Why Henderson cabinets cost more to reface than a calculator tells you
Most Henderson kitchens built during the Green Valley and Anthem boom came with 11.5-inch-deep upper cabinets instead of the standard 12 inches. Half an inch doesn’t sound like much until a veneer panel is laid on it. The stock depths assume a 12-inch face, so a shop has to custom-cut and edge-band the veneer to fit, and that adds roughly $300-$600 to a typical refacing job. No national cost calculator warns you about this. You only find out when three bids come back wildly different and you can’t tell why.
Depth is just the first quirk. Here’s what else we see behind those doors:
- Staple-gun construction. Builder crews in the 1990s shot staples, not screws, through the face frames. Over 25-30 years in desert heat, those staples loosen. A refacing job has to stabilize the boxes before any veneer goes on, or the new doors will rack and the drawers will rub.
- Laminate-over-particleboard boxes. The carcasses are often laminate glued to particleboard. Before veneering, the surface has to be prepped and sealed, because particleboard swells the moment moisture touches raw edges and the veneer won’t bond flat.
- Non-standard box depths. The 11.5-inch uppers, plus odd drawer-stack heights, mean drawer fronts need custom sizing rather than an off-the-shelf order.
None of this is a defect. It’s just what the housing stock is. Knowing it before you get a quote is the only way to compare bids honestly, because a low number that ignores the prep work is a number that grows.
What you should look for in a refacing quote
A refacing quote in Henderson should spell out surface prep, box stabilization, custom veneer cuts, and door/drawer hardware selection as separate line items. If a bid is one lump sum, ask what happens when the crew finds loosened staples or laminate lifting at a corner. A contractor who’s done Henderson kitchens knows this is coming and builds it in. One who hasn’t will discover it mid-project and hand you a change order.
That’s the difference between Kitchen Remodeling done right and a project that bleeds money. For the broader scope, our Kitchen Remodeling in Henderson page walks through full-cabinet-and-counter work versus a refacing-only approach.

Refacing with KraftMaid components vs. builder-grade replacements
Brand selection moves the number more than anything else in the job. This is where homeowners get the most confused, so here’s the side-by-side.
| Approach | Henderson price range | What drives the number |
|---|---|---|
| Refacing with KraftMaid doors and drawer fronts | $18,000-$45,000 | Premium door styles, custom sizing for 11.5-inch uppers, matching drawer-front profiles, durable finishes |
| Refacing with builder-grade replacement doors | $14,000-$22,000 | Stock door profiles, standard depths, limited finishes, thinner veneer |
| Full cabinet replacement (not refacing) | $4,000-$13,000 installed for boxes; $14,000-$45,000 for a full remodel | New boxes, tear-out, drywall repair, countertop and backsplash rework |
KraftMaid components cost more up front, but the doors and drawer fronts are built to hold their shape through the thermal cycling a desert kitchen sees. That matters here. Henderson summers push well above 100°F, and the inside of a kitchen cabinet facing a west window runs hotter than the room. Cheap veneer peels at the edges; cheap drawer fronts cup and warp. Paying for the better door now is cheaper than replacing it in a few years.
Our technicians have up to 12 years of experience, and they’re background-checked and in uniform on every job. See the full list of what we install on the home page.
How upfront pricing kills the “we found particleboard” surcharge
Henderson homeowners tell us the same story: the refacing quote looked reasonable, the crew showed up, pried off a door, found laminate-over-particleboard, and suddenly there’s a surcharge for surface prep that was never in the bid. The number you saw was not the number you paid.
Groundwork Construction Co. of Henderson prices refacing with the prep included. We look at the boxes, the depth, the construction, and the laminate condition before we write the quote, because we’ve seen what a Henderson 1990s kitchen looks like inside. The number you see is the number you pay. Backed by a 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s written down, not spoken.
HOA design review: the step that stalls refacing projects in Anthem
If your home sits in a master-planned community like Anthem, Seven Hills, or Green Valley, an HOA design-review submission may be required before work begins, particularly when a refacing changes a finish or color visible from a courtyard or street. Each association sets its own rules. The Anthem kitchen remodeling page covers that community’s process in detail, and the Seven Hills kitchen remodeling page covers the upscale semi-custom builds on the elevated terrain at the city’s southern edge.
Skip the design review and you can end up pulling finished work back off the wall. We factor it into the schedule up front.
Does refacing hold up through Henderson’s desert summers?
Yes, with the right materials and veneer. The thermal cycling is the real test. Cabinets expand and contract as interior temperatures swing from a cool morning to a 110°F afternoon, and the veneer adhesive has to flex without letting go. Quality veneer on properly prepped and sealed boxes handles it. When it doesn’t, the 730-Day Done Right Promise covers peeling veneer and warped drawer fronts. Most refacing-only shops won’t put that in writing, because they can’t stand behind a one-season adhesive job.
Cabinet refacing pricing table for Henderson
| Item | Price range |
|---|---|
| Full kitchen reface, KraftMaid components | $18,000-$45,000 |
| Full kitchen reface, builder-grade replacements | $14,000-$22,000 |
| Custom veneer for 11.5-inch uppers | $300-$600 |
| Cabinet installation (new boxes) | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
| Full kitchen remodel (refacing plus counters, backsplash, island) | $14,000-$45,000 |
Project totals shift with the size of the kitchen and how much box stabilization the cabinets need. A 2000s Anthem kitchen with clean boxes lands lower than a 1990s Green Valley kitchen with staple-gun construction and lifting laminate.
FAQs
Cabinet refacing in Henderson typically runs $14,000-$45,000, with most tract homes centered in the mid-range and premium-door KraftMaid jobs at the high end. The 11.5-inch uppers common to 1990s builds add $300-$600 in custom veneer work. Call (844) 320-6757 for an exact quote, with estimates free.
Refacing is usually cheaper than a full remodel, but not always cheaper than replacing just the boxes. New boxes run $4,000-$13,000 installed, while a full reface with new doors and prep work runs $14,000-$45,000. Refacing wins when the existing boxes are solid and saving the countertop and layout matters. Call (844) 320-6757 and we’ll tell you which one fits your boxes.
Yes, though some Anthem and Seven Hills communities require a design-review submission before work starts, especially when the finish or color shows from a courtyard. We build that step into the schedule. Call (844) 320-6757 and we’ll help you sort the submission before the crew arrives.
It’s covered. The 730-Day Done Right Promise means if veneer peels or drawer fronts warp from the desert thermal cycling, we make it right, no fine-print argument. Most refacing-only shops won’t offer a guarantee that long. Call (844) 320-6757 to talk through the guarantee before you sign anything.
When you’re ready for a kitchen that looks new without a full tear-out, start with a $1,000 off projects over $10,000 and 0% financing for 18 months, plus a free project estimate and design consult. Groundwork Construction Co. of Henderson handles the design review, the surface prep, and the custom veneer in one quote, from foundation to finish line. Call (844) 320-6757 today. Live person, 24/7.
Written by the team at Groundwork Construction Co. of Henderson, serving Henderson, NV.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo












