







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Winchester: What to Expect and What It Costs
New cabinets and countertops in Winchester typically run $14,000 – $45,000 for a full set, or $4,000 – $13,000 if you’re only replacing cabinets and $2,000 – $6,500 for countertops alone. Most jobs take 3 – 5 weeks from demo to final caulk, with the bulk of that time spent waiting on countertop fabrication. Call (844) 320-6757 for a free on-site estimate with a written, line-item price.
That range holds whether you’re updating a 1990s condo near the resort corridor or reworking a rental unit that’s been the same since the Reagan years. Winchester has a lot of both, and the scope differences matter more than most homeowners expect going in.
Key takeaways
- Cabinets and countertops are two separate purchases with two separate lead times. Cabinets usually arrive in 2 – 4 weeks; fabricated stone counters add another 1 – 2 weeks after templating.
- Keeping the sink, range, and dishwasher where they are saves real money. Moving any of them pulls in plumbing, electrical, and sometimes wall framing.
- In Winchester, everything routes through Clark County permitting, not a city building department. We pull the permits and schedule the inspections.
- A 730-Day Done Right Promise covers the workmanship on every job we take on.
How we run a cabinets and countertop job, start to finish

A cabinet and countertop replacement is a sequence, not a single event. Here’s how the stages actually go.
Stage 1: Measure, design, and order (week 1)
We measure the room, check the walls for plumb and the floor for level, and go through door style, finish, and box construction with you. You decide the cabinet line and layout here. This is the stage where a late change costs the most, so it’s also the stage where we slow down and get it right. We write the order and give you an itemized price before anything is signed.
Stage 2: Demo and prep (days 1 – 2)
Old cabinets come out, old countertops come off, and we inspect what’s behind them. In Winchester’s older multifamily stock, that’s where we find the surprises: water damage under a sink that’s been leaking slowly for years, drywall that was never finished behind the old backsplash, or a shutoff valve that won’t close. We photograph everything and tell you before we fix it, with a number attached.
Stage 3: Cabinet installation (days 3 – 5)
New boxes go in, get shimmed and leveled, and get fastened to studs. Doors and drawers go on last. We template for the countertops at the end of this stage. That template is the clock-starter for fabrication, and it’s why the countertop is what usually sets your completion date.
Stage 4: Countertop fabrication and install (days 8 – 18)
Quartz and granite get cut to the template off-site. A countertop installation in Winchester runs $2,000 – $6,500 depending on material and square footage. The install itself is a half-day for most kitchens, and the seams are where you judge the work. We set them tight and keep the pattern matched at the join.
Stage 5: Sink, faucet, final trim, walkthrough (days 19 – 25)
Plumbing reconnects, the dishwasher goes back, and we do the final caulk lines. Then we walk the room with you. That walkthrough is also when the 730-Day Done Right Promise starts covering the work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The materials you’ll actually choose between
The two decisions that move both the price and the lifespan are cabinet box construction and countertop material. Here’s the honest version of each.
- Stock vs. semi-custom cabinets. Stock cabinets come in fixed widths and arrive fast, which suits a quick rental refresh. Semi-custom lets you hit the ceiling line and the oddly sized corner in a mid-century kitchen without filler strips everywhere. The cost gap is real, but so is the visual difference.
- Plywood vs. particleboard boxes. Plywood holds up better to moisture, which matters in a kitchen with a dishwasher and a sink. Particleboard is common in builder-grade and holds fine if it stays dry. It doesn’t stay dry forever.
- Quartz vs. granite vs. laminate. Quartz is non-porous and doesn’t need sealing, and it’s the most popular pick for a reason. Granite is natural stone with real variation and needs periodic sealing. Laminate is the budget option and looks better than it did a decade ago, but it won’t take a hot pan.
- Butcher block. Warm, repairable, and cheap to sand back. It needs oiling and it will show water rings if you ignore it.
- Drawers vs. doors. Deep pot drawers cost more per unit than a shelf behind a door, and almost everyone who switches wishes they’d done it sooner.
We work with brand partners including KraftMaid and Cambria for the higher end of the range, so you’re picking from known lines with known warranties rather than whatever the supply house had in stock.
What cabinets and countertops cost in Winchester, NV

Most Winchester jobs land between $14,000 and $45,000. That’s a wide band on purpose, because five variables push a job from one end to the other.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
| Full cabinets and countertops job | $14,000 – $45,000 |
The variables that move it:
- Linear footage and layout. A galley with ten feet of counter is a different job than a U-shape with an island.
- Whether anything relocates. Moving the sink or range means plumbing and electrical, and sometimes opening a wall.
- Material grade. Semi-custom cabinets and quartz sit at the top; stock and laminate sit at the bottom.
- Condition behind the old cabinets. Rot, mold, or out-of-square walls add repair time before install can start.
- Permit scope. Straight cabinet replacement is usually a lighter permit than a job that moves plumbing or adds an island with a circuit in it.
Your written estimate lists what’s included: demo, haul-away, cabinet install, countertop template and install, sink and faucet reconnect, and permit fees. It also states what isn’t, like structural repair or electrical relocation if we find something hidden during demo. You see that before work starts, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Winchester homes specifically do to this job
Winchester is an unincorporated Clark County island between Las Vegas and the Strip, and that shapes the work. There’s no municipal building department here, so permits go through Clark County, and the inspection calendar fills up because the same pool of crews and inspectors is also serving the constant tenant-improvement and remodel churn along the resort corridor. We build that into the schedule instead of pretending it doesn’t exist.
The housing stock drives the rest. Much of what we see in the 89109 ZIP is mid-century through 1990s apartments and condos rather than newer subdivision homes, and rental multifamily makes up a big share of it. That means we’re often replacing cabinets that were the cheapest available when the building went up, and finding undersized or clogged shutoffs, tired laminate tops, and drywall that was never properly finished behind a backsplash. Around the Strip-facing buildings, we’re also working alongside commercial-scale projects, which is why scheduling early in the day matters here, especially in summer. When the heat holds above 105°F, we stage demo and cabinet delivery in the morning and keep the adhesive work inside.
If your project grows past cabinets and countertops into a wider scope, our Kitchen Remodeling in Winchester page covers that. Homeowners often pair an open-plan cabinet job with a Garage Conversion ADU in Winchester, and we handle both. You can see everything we do across Winchester and the surrounding areas, including our Kitchen Remodeling service. For a second dwelling on the lot, we also build a New Detached ADU in Winchester.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Winchester

Most jobs take 3 – 5 weeks from demo to walkthrough. The cabinet install itself is only 2 – 3 days; the countertop fabrication wait is what takes the time. Call (844) 320-6757 for a schedule based on the cabinet line you want.
Often yes, and it always runs through Clark County rather than a city office. Straight cabinet replacement can sometimes go without one, but any job that moves plumbing, adds a circuit, or brings in an island usually needs a permit and an inspection. We pull it and schedule the inspection for you.
Yes, and it’s a common way to control cost. Keeping the sink, range, and dishwasher in place lets the new cabinets slot into the existing rough-in. Countertop installation then runs $2,000 – $6,500 and cabinets $4,000 – $13,000, with far less disruption.
Plan on $14,000 – $45,000 for the full set. Quartz or natural stone, semi-custom boxes, and an island push you toward the top; stock cabinets and laminate toward the bottom. Call (844) 320-6757 for an exact quote with a written line-item price.
Every job is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The cabinets and countertops themselves also carry their manufacturers’ warranties. We hand you that paperwork at the walkthrough.
Get a free estimate for cabinets and countertops in Winchester
Call (844) 320-6757 to set up a free on-site estimate and design consultation for cabinets and countertops in Winchester. A live person answers any hour, and we’ll walk your kitchen, go through cabinet lines and countertop options, and leave you with a written, line-item price. No pressure to sign on the first visit. Free estimates, and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












