







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Paradise, NV: What the Job Actually Involves
Door installation in Paradise, NV typically runs $650 to $3,200 per opening, and most single-door swaps are finished in one day with a licensed installer on site. Entry doors sit at the higher end because of frame repair and hardware; interior doors land near the low end. Prehung units arrive assembled, so the real work is removing the old slab, squaring the rough opening, and getting the threshold and weather seal right. Call (844) 320-6757 for a free on-site estimate before you commit to a number. Exterior openings in this ZIP often need a permit; interior doors usually don’t.
How door installation moves from demo day to final walkthrough

We don’t hand you a date and disappear. Here’s the sequence, stage by stage, so you know what to expect and what you’ll be deciding.
Stage 1: Measure and spec (days 1 – 2)
A technician measures the rough opening, checks plumb and level on the existing frame, and flags any rot, water damage, or settling that will change the scope. You’ll decide the door style, material, finish, and hardware at this stage. On slab and commercial-adjacent construction in Paradise, we also confirm the opening size against the plans and the fire-rating requirement if the door is part of a rated assembly. Background-checked, uniformed technicians handle every measurement.
Stage 2: Order and permit (days 2 – 10 for standard stock; 2 – 4 weeks for custom)
If a permit applies (exterior doors and any fire-rated opening usually do), we file with Clark County and wait for the sign-off before we demo. Stock doors ship fast; custom sizes and specialty hardware push the timeline. You’ll sign off on the final product and hardware specs before anything is ordered.
Stage 3: Demo and frame prep (2 – 4 hours)
We pull the old door and slab, inspect the rough framing, and repair any rot, warped studs, or failed flashing. Thresholds get reset. In tight Strip-adjacent buildings this is where access matters: we pre-stage materials, schedule around loading-dock windows, and keep the crew small enough to move through a condo corridor without blocking residents.
Stage 4: Set and hang (2 – 4 hours)
The new prehung unit goes in, gets shimmed, plumbed, and secured. Hinges, lockset, deadbolt, and closer (if fire-rated) go on. You’ll test the swing and the seal before we call it done. This is the stage where most complaints on cut-rate installs happen, because a door hung half a degree off won’t latch right and will leak.
Stage 5: Adjust, seal, and walkthrough (1 hour)
Final adjustment, weatherstripping, caulking at the exterior, and a walkthrough with you to confirm the swing, latch alignment, and finish. Every Paradise door job is backed by the 730-Day Done Right Promise. If it doesn’t close right in year two, we come back and fix it. Full-scope projects that pair door work with other trades are covered under our Windows & Doors in Paradise page if you’re planning more than one opening.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Door specs are where price swings most. Here’s the honest trade-off on each choice.
- Steel entry door: The security-first pick. Solid, resists forced entry well, holds a deadbolt firmly. Needs touch-up paint if scratched. Runs $1,200 – $2,800 installed with hardware. Suits condo and townhome entries where HOA rules prohibit major facade changes.
- Fiberglass entry door: Holds up best to Mojave sun and desert dust. Won’t warp or rust. A premium option at $1,800 – $3,200. Best for exposed east- and west-facing entries.
- Solid wood entry door: Classic look, thermally solid, but needs sealing and re-staining every few years in this climate. $1,500 – $3,000 installed. Fine for shaded or covered entries.
- Interior hollow-core: The standard for bedrooms and closets. Light, cheap, fine for interior use. $650 – $1,100 installed.
- Interior solid-core: Better sound deadening, feels more substantial, holds up better against wear. $900 – $1,500. Worth it in a condo where neighbors are close.
- Sliding barn or pocket door: Space-saver for tight closets and laundry. Adds framing complexity. $1,100 – $2,200 depending on the hardware and wall cavity. Not every opening can take one.
- Rolling-code smart locks: For condo-tower and multifamily entries, we recommend rolling-code electronic deadbolts over static-code keypads. Every entry event generates a new code, which matters when units are rented short-term or shared among staff.
- Fire-rated assemblies: Any door on a corridor, stair, or mechanical room in a multi-unit building must carry a rating (typically 20, 45, or 90 minutes) and must be installed with the required closer and labeled hardware. Panels from Atlas and Boral meet these specs where a rated assembly is called for.
What door installation costs in Paradise, NV

Expect $650 – $3,200 per door, and factor a few hundred more if the existing frame needs repair or the opening has to be resized. The variables that push the job to one end of the range:
- Door material and grade: A hollow-core interior door runs $650 – $1,100 all-in. A fiberglass or fire-rated exterior door runs $1,800 – $3,200. Specialty hardware pushes higher.
- Existing frame condition: Rot, warping, or unlevel framing adds a few hundred dollars in carpentry. In older condo and apartment stock around the Strip corridor, we regularly see water-damaged thresholds from roof or irrigation leaks that have to be rebuilt before the new door can go in.
- Opening size and configuration: Standard 32″ or 36″ openings keep the price down. Oversized, arched, or pocket-door openings add framing and labor.
- Permit scope: Fire-rated and exterior openings that trigger a Clark County permit add a filing and inspection cost. Interior non-rated swaps usually don’t.
- Access and scheduling: Condo towers and Strip-adjacent buildings with loading-dock windows, restricted hours, or freight-elevator scheduling carry a small labor premium.
Your written estimate will itemize the door, hardware, labor, permit fees, and any frame repair we find. What’s typically not included: wall or trim painting after install, major framing repair that goes beyond the opening, and structural work that turns a door swap into a wider renovation. No-hassle upfront pricing on every estimate, and if the final scope comes in under the quoted number, you pay the lower number.
See the difference
Before
After
Before
After
Before
AfterWhat Paradise jobs specifically demand
Paradise isn’t a subdivision market. It’s the Strip corridor, the Convention Center district, and the mid- and high-rise condo and apartment towers that surround them. Most of the door work we do here is in multifamily and mixed-use buildings, not single-family homes, and that changes the job in ways you don’t see in suburban construction. Fire-rated corridor and stairwell doors turn into code-compliance work with Clark County’s fire and life-safety review. Access windows are dictated by the property, not the crew: freight-elevator reservations, overnight install windows so residents and guests aren’t disturbed, and phased replacements where door halves of a hallway go in on different nights.
The climate also does real damage. Summer highs above 105°F bake west- and south-facing doors and dry out weatherstripping within a few seasons. Monsoon storms push wind-driven rain against thresholds, so we seal exterior openings carefully and prefer fiberglass or steel over wood on exposed faces. If your door work sits inside a broader unit refresh, homeowners often pair this with Cabinets & Countertops in Paradise or a Garage Conversion ADU in Paradise in the same building. We cover Paradise and the surrounding neighborhoods, including Winchester, Whitney, Spring Valley, and Enterprise. If your project also touches glazing, see our Windows & Doors service.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Paradise

A standard prehung door install takes half a day to one full day. Custom openings, fire-rated assemblies, and jobs requiring frame repair push to two to three days. Permit filing and product lead time are separate and typically add one to four weeks before the crew arrives. Call (844) 320-6757 for a realistic timeline on your specific opening.
Exterior doors and any fire-rated opening usually require a Clark County permit; interior non-rated doors typically don’t. Because Paradise runs along the resort corridor, buildings in the Convention Center district often sit on a different permit track with fire and life-safety review, and we know that review process. We pull the permit and pass the inspection as part of the job when one is required.
Yes, in most cases. A same-size door swap touches only the opening, frame, and trim. If you’re widening the opening or converting a closet to a pocket door, framing changes enter the scope and add cost and permitting. We’ll tell you at the measure stage which side of that line your job falls on.
Most jobs land between $650 and $3,200 per door depending on material, hardware, and whether permits apply. Entry doors at the high end, interior hollow-core at the low end, and fire-rated corridor doors in a condo tower usually sit at the top of the range. Call (844) 320-6757 for an exact quote. Estimates are free.
Every door install is covered by the 730-Day Done Right Promise. If the door hangs wrong, the seal fails, or the hardware starts sticking within that window, we come back and make it right. No fine print, no shortened coverage. The number you see on the estimate is the number you pay.
Get a free door installation estimate in Paradise
Call (844) 320-6757 to schedule a free on-site estimate for Door Installation in Paradise. We’ll measure the opening, walk the frame for hidden damage, and hand you a written line-item quote with every option priced out. A live person answers, 24 hours a day, seven days a week. Estimates are free, and our technicians have up to 12 years of experience on doors and framing.
Written by the team at Groundwork Construction Co.












