Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
How Long Does Windows & Doors Take? Timelines and What to Expect
A contractor who quotes “one day per window” is telling you how fast installation goes, not how long the project takes. Those are two different numbers, and confusing them is the single most common reason Henderson homeowners end up frustrated by a window project that “should have been done by now.” Custom-order windows in the Henderson market currently carry six to twelve week lead times, and that clock starts after precise measurements, not after you sign the contract. Add permit review with Clark County when structural changes are involved, and a whole-house replacement can realistically stretch to the far side of three months. This guide lays out the entire timeline honestly: measurement, ordering, lead time, permitting, installation day hour by hour, inspection, and how we sequence windows alongside interior work so finish trades aren’t left waiting on a delivery truck.
Quick Answer
A standard window replacement in Henderson takes about 1 to 3 days of active installation work per five to eight windows, but the full project timeline from signed contract to final inspection usually runs 8 to 16 weeks. Most of that time is lead time and permitting, not labor. Custom-sized or non-standard openings in older Henderson housing stock can push the total to 16 to 20 weeks.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- The full anatomy of a window and door project timeline
- Step-by-step: what happens from measurement to final inspection
- What installation day actually looks like, hour by hour
- Staggered replacement vs. whole-house replacement: the timeline math
- The custom-size problem in Henderson’s older housing stock
- How we sequence multi-trade projects so finish work isn’t held up
- Permits and inspections: what Clark County actually requires
- How cost and timeline interact (and where to avoid surprises)
The full anatomy of a window and door project timeline
Every window and door replacement project in Henderson is built from six discrete phases, and each has its own clock. When a contractor quotes you a single number like “two weeks,” they’re usually only counting phases four and five. Here’s the honest breakdown of what the schedule looks like.
- Phase 1 – Measurement and design consultation: 3 to 7 days. Precise measurements happen on-site, and material selection (frame profile, glass package, hardware) is finalized in the same window.
- Phase 2 – Permit review submittal: 5 to 15 business days if structural changes, new opening sizes, or egress requirements are involved. Straight like-for-like swaps in Henderson often don’t require a permit, but it’s worth confirming with the city before assuming.
- Phase 3 – Order placement and factory lead time: 4 to 12 weeks depending on product line and customization. This is the phase that gets buried in most quotes.
- Phase 4 – Delivery and pre-install prep: 3 to 7 days. Materials staged, interior protection installed, old units confirmed ready to come out.
- Phase 5 – Installation: 1 to 2 days per 5 windows on standard swaps; longer for doors or oversized openings.
- Phase 6 – Inspection and punch list: 3 to 10 business days depending on inspector availability.
That adds up to a realistic 8 to 16 week range for most Henderson projects. The real-world variation comes from product line choice and whether your home was built with standard nominal sizes or something custom. Homes built in the 1980s to 1990s in Green Valley tend to hit standard sizes; older pockets of downtown Henderson and parts of the Cadence and Inspirada master-planned areas have their own quirks. If you’re coordinating windows with broader structural work, our Home Additions & ADU in Henderson team handles the sequencing so window delivery doesn’t collide with framing or finish milestones.
Step-by-step: what happens from measurement to final inspection
Here’s the exact sequence we follow at Groundwork Construction Co. on a Henderson window or door project, so you know what to expect at every milestone. Each step has a check-in, and every milestone is documented so there are no surprises about where things stand.
- Free consultation and rough measurement. We walk the home, note existing window types, flag potential surprises (dry rot, incorrect flashing, non-standard framing), and talk through material options. This is also when we discuss the difference between standard and custom sizing so the lead-time math is visible up front. Our Andersen and Marvin lines cover most configurations, but custom orders from either carry longer factory queues.
- Final measurement and product selection. A second, more precise measurement captures actual opening dimensions, sill depth, and any structural irregularities. You lock in the frame and glass package. This is when deposit is typically collected.
- Permit submittal (if required). Structural changes, new openings, or door replacements that affect egress get submitted to the city. We pull the permit and handle inspection coordination – the number you see on the estimate is the number you pay, and permits are included in that number, not tacked on later.
- Order placement. Products go into the manufacturer queue. Lead times are quoted in writing and confirmed in your project schedule. If a factory delay hits, you hear about it from us the same day we hear about it.
- Pre-install walkthrough. About a week before install, we confirm access, note any furniture or window treatments needing to move, and walk through the daily choreography with you so nobody is surprised by a 7 a.m. arrival.
- Installation day(s). The unit comes out, the new one goes in, flashing and sealing happen correctly, and the finish work is completed. Details below.
- Inspection and punch list. The city inspector signs off if the permit requires it. We walk the work with you, note anything that needs adjustment, and file the 730-Day Done Right Promise paperwork.
For projects where windows are part of a larger scope – an enclosed patio, a rear-yard structure, or a full addition – the sequencing follows our project calendar rather than a fixed schedule, because dependencies shift based on what else is happening. Our Groundwork Construction Co. of Henderson home page lays out how those larger scopes come together from foundation to finish line.
What installation day actually looks like, hour by hour
Most homeowners have never watched a window get swapped, so they over-plan or under-plan the day. Here’s a realistic hour-by-hour picture of a standard window replacement day for a Henderson home, so you can set up your schedule accordingly.
- 6:30 to 7:00 a.m. – Arrival and setup. The crew arrives in uniform, walks the work area with you, and lays down floor and furniture protection. Old window treatments come down and get bagged.
- 7:00 to 8:00 a.m. – Rough prep and old unit removal. Interior trim comes off, the old sash and frame are cut out carefully, and debris is bagged immediately. You’ll feel the outdoor air for about 15 to 30 minutes per opening.
- 8:00 to 9:30 a.m. – Opening prep and inspection. The rough opening is checked for rot, incorrect framing, or hidden moisture damage. On older Henderson homes this is where a surprise sometimes shows up, and the crew documents it with a photo and a call before proceeding.
- 9:30 to 11:30 a.m. – Setting and securing the new unit. The new window is shimmed level, secured, insulated, and flashed. This is the phase where the difference between a good install and a great one gets made.
- 11:30 a.m. to 1:00 p.m. – Interior finish. Trim is reinstalled, caulk lines are set, and the sill is finished. This is the phase most visible to the homeowner, and small inconsistencies here are what you’ll notice for years.
- 1:00 to 2:00 p.m. – Exterior sealing and cleanup. Exterior caulk and flashing are completed, protective film is peeled, and the workspace is swept and wiped down before the crew leaves.
On a standard swap, one crew handles two to four windows per day depending on ceiling height, whether the openings are on upper floors, and how much trim work needs to be redone. Door replacements typically take most of a day each because the frame and threshold need to be squared correctly. If your project involves exterior hardscape work at the same time, our Driveway & Pavers in Henderson crew coordinates access so the window installers aren’t boxed in.
Staggered replacement vs. whole-house replacement: the timeline math
Henderson homeowners often ask whether it’s smarter to replace a few windows at a time or the whole house in one shot. Both approaches work, but the timeline math is different enough that it’s worth comparing side by side.
Staggered replacement means doing three to five windows now, three to five more in a year, and finishing over two to three cycles. The advantage is that each phase is smaller and easier to fit around your life. The tradeoff is that total project duration is measured in years, not weeks, and each phase re-triggers a lead time. Staggered projects also risk color or style mismatch if the manufacturer discontinues a profile between phases – a real concern with twelve-month gaps.
Whole-house replacement concentrates the disruption into one window of a few weeks. The full lead time is only incurred once, the installation happens in a single coordinated stretch, and you get one inspection, one cleanup, one final walkthrough. For most Henderson homes with six or more windows in need of replacement, this is the better timeline and cost outcome.
The middle ground is a “priority then remainder” approach: do the four or five windows causing the biggest energy or comfort issues first (usually west-facing windows in Henderson where afternoon sun drives interior temperatures up), then batch the rest into a second phase within twelve months. This works well when budget is a factor. The Fence Installation in Henderson team uses a similar phasing approach for perimeter projects that get completed across seasons.
The custom-size problem in Henderson’s older housing stock
Standard window sizes exist. Homes built to any kind of modern code use rough openings that align with a set of common dimensions, and replacements in those homes can be ordered from stock. But Henderson has pockets of older construction – homes built from the 1970s through the 1990s in neighborhoods like downtown Henderson, parts of Green Valley near Sunset, and portions of established areas off Lake Mead Parkway – where framing dimensions don’t match any standard nominal size.
When a custom order is required, three things happen to the timeline. First, factory lead time jumps from the 4 to 6 week range to the 8 to 12 week range, sometimes longer for dual-pane with specialty glass. Second, the price per unit increases noticeably. Third, if the customer changes their mind after ordering, cancellation costs are real because the unit was cut to that specific opening.
In our experience, the custom-size surprise hits homeowners in older Henderson neighborhoods hardest because they assume a “standard” replacement will cover their home. The right move is to have the measurement done carefully before any order placement, and to have the estimator confirm rough opening dimensions against manufacturer catalogs before you commit. If you’re in a home from 1990 or earlier, expect a real conversation about standard versus custom sizing before you get to the ordering phase – this is where the timeline either holds or extends.
How we sequence multi-trade projects so finish work isn’t held up
Windows rarely happen in a vacuum. In many Henderson projects, window replacement is bundled with interior painting, drywall repair, floor refinishing, or a full remodel. That’s where sequencing becomes its own art form, and where most timeline failures occur. Finish trades waiting on window delivery is a classic project-delay pattern, and we structure the schedule to avoid it.
Here’s our general sequencing principle: window and door delivery is a hard dependency for finish trades, so it goes into the project calendar first, and every other trade is scheduled around it.
- Windows ordered at the front of the schedule. The order placement date is locked into the master project calendar on day one, with the confirmed factory lead time attached. Every subsequent trade milestone is planned backward from that delivery date.
- Demo and rough-in work aligned to pre-delivery window. Interior demo, framing changes, electrical or plumbing rough-in, and drywall work all get scheduled into the weeks before window delivery. This keeps crews productive while the factory is building your units.
- Drywall and paint after window install. Interior finish trades are scheduled only after windows are set and the exterior seal is confirmed. This prevents the classic problem of painting a room while the window crew is still cutting.
- Final finishes after inspection. Trim carpentry touch-ups, paint touch-up, and any hardware installation happen after the city inspector has signed off. That way nothing has to be undone for a re-inspection.
This sequencing is the main reason a bundled project sometimes runs a few weeks longer than an isostandard window-only job: the coordination cost is real, but it prevents the far worse scenario of finish trades idling for weeks waiting on a delivery. When we run kitchen and bathroom remodels that include window replacement, we use premium cabinet and countertop partners like Wellborn and Cambria so the interior finish schedule isn’t the bottleneck – the factory window lead time still is, and we plan around it.
Permits and inspections: what Clark County actually requires
Permit requirements for window and door replacement in Henderson are not one-size-fits-all. The rules depend on what’s actually changing.
- Like-for-like replacement in the same opening size: typically no building permit required, though HOA rules may still apply and manufacture of the replacement unit should match the removed unit in performance characteristics. Confirm with the city before assuming.
- New opening created (cut into existing wall): permit required, plus structural review. Timeline extends 2 to 4 weeks for review plus inspection.
- Enlarged or resized opening: permit required, and this is when structural review matters most. A licensed professional should be handling the framing modifications.
- New door in an exterior wall: permit required, and egress and structural review both apply.
- Window replacement where safety glazing is required (near doors, low to floor, in bathrooms): the glazing must comply with code but a permit is usually not required for the like-for-like swap.
We pull every required permit ourselves and coordinate all inspections – permits and inspections are part of what we build into the price, not a separate add-on. That matters more here than in most markets because Clark County inspection scheduling can swing between a few business days and a couple of weeks depending on the season and workload. Build that variable into your expectations if the permit phase is in play for your project.
How cost and timeline interact (and where to avoid surprises)
Cost and timeline move together in ways that aren’t always obvious. Here’s the relationship in a Henderson context:
- Faster timelines cost more. Expedited factory production or premium in-stock product lines exist but carry higher per-unit pricing. A standard lead time of six to eight weeks will always cost meaningfully less than a three-week expedited option.
- Custom sizing costs more and takes longer. Both the unit price and the lead time increase. Budget for both.
- Permit-required changes cost more and add weeks. Pull all permits up front and don’t try to shortcut them – the cost of a failed inspection or a re-do dwarfs the cost of a permit.
- Multi-trade bundling costs more but usually costs less than the same work done separately. Bundling windows with interior painting or an adjacent remodel typically trims 10 to 20 percent off the total versus running the jobs independently, mostly because mobilization and inspection costs are shared.
Upfront pricing, no surprises is the commitment we make on this. The number you see at the estimate is the number you pay, and 0% financing for 18 months exists specifically so a whole-house window project isn’t held back by a timing mismatch with your cash flow. Projects over $10,000 also qualify for $1,000 off, and that stacks against the financing without hidden conditions.
Common Mistakes to Avoid
- Believing an “install time” quote is the whole timeline. If a contractor quotes “two days,” ask them to clarify that this is installation only. The full timeline including lead time is what you’re actually buying. In Henderson, custom-order lead times alone are usually longer than the whole quoted install period.
- Assuming every replacement needs no permit. Like-for-like swaps often don’t, but the moment a new opening is cut, a door is added, or a window is enlarged, Clark County permit review comes into play and adds weeks. Confirm before committing to a schedule.
- Ordering before final measurement. A rough measure at the first consultation is not the same as the final measurement used for order placement. Ordering against a rough measure is how custom-size errors happen on older Henderson homes.
- Staggering replacement without checking product continuity plans. Batching a Henderson window replacement across multiple years is fine, but confirm the manufacturer isn’t discontinuing the profile or glass package you’re using. Otherwise your 2028 windows won’t match your 2026 ones.
- Scheduling finish trades before window delivery. Painting a room while the window crew is still cutting creates finish damage and rework. Lock window delivery timing into the schedule first, then plan interior finishes.
- Underestimating inspection turnaround. Clark County inspection scheduling fluctuates with workload. Build 1 to 2 weeks of buffer into any deadline that depends on final inspection.
- Skipping the pre-install walkthrough. Fifteen minutes of walking through access, furniture, and expectations the week before install prevents nearly every day-of confusion we see on Henderson projects.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional
Window and door replacement involves a surprising number of pitfalls that only show up in the field: rot or incorrect flashing behind an old unit, framing that doesn’t match the ordered size, code issues with egress or safety glazing, and inspection coordination with the city. Any of the following scenarios should be handed to a professional rather than attempted as a DIY project. Structural changes to exterior walls, new openings created in the building envelope, door replacements in exterior walls, and any project involving safety glazing in bathrooms or near floor level should all go to a licensed crew. Whole-house projects of seven or more openings benefit from a single coordinated professional schedule rather than a handyman-by-handyman approach, both for warranty consistency and for inspection efficiency. If you’re unsure whether your project falls into professional territory, that’s worth a call. Groundwork Construction Co. of Henderson offers free estimates in Henderson – call (844) 320-6757 to schedule an on-site walkthrough. Our technicians have up to 12 years of experience, every project is covered by the 730-Day Done Right Promise, and calls are answered by a live person 24/7 – not a voicemail or a Monday callback.
Frequently Asked Questions

Window replacement in Henderson takes 8 to 16 weeks from signed contract to final inspection for a typical whole-house project, with 1 to 3 days of actual installation work per five to eight windows. Most of the elapsed time is factory lead time (6 to 12 weeks for custom-order units) plus permit review and inspection scheduling with Clark County. Call (844) 320-6757 for a free estimate that breaks down the timeline for your specific window count and sizes.
Like-for-like window replacement in the same opening size generally doesn’t require a building permit in Henderson, but new openings, enlarged openings, and new exterior doors do require permit and structural review. Confirm the specific requirement for your project with the city before ordering – pulling a permit late extends the timeline significantly. Call (844) 320-6757 if you want us to confirm the permit situation on your specific project.
Custom window orders carry 8 to 12 week lead times, sometimes longer, because the factory has to build to your specific opening dimensions rather than pull from stock. Non-standard openings in older Henderson housing stock are the most common reason a project extends beyond the typical 8 to 16 week range. Call (844) 320-6757 for a realistic lead-time estimate based on the manufacturer and product line you’re considering.
Yes, staggered replacement works, but each phase re-triggers a factory lead time and the total project duration is measured in years rather than weeks. Whole-house replacement concentrates the disruption and the lead time into one cycle, which is usually the better timeline and cost outcome for Henderson homes with six or more windows needing replacement. Call (844) 320-6757 to talk through which approach fits your situation.
Installation day is disruptive but predictable: expect the crew on-site from about 6:30 a.m. through early to mid-afternoon for two to four windows, with outdoor air exposure of 15 to 30 minutes per opening while old units come out and new ones go in. You’ll want to plan the day around the work space rather than trying to host or work-from-home intensively in adjacent rooms. Call (844) 320-6757 and we’ll walk you through a realistic day-of plan for your project.
Damaged or mis-sized units are handled as a factory replacement, which adds 2 to 6 weeks to the timeline depending on the manufacturer’s queue and whether the error was ours or the factory’s. This is exactly why final measurement happens before order placement rather than after – it’s the single most effective way to prevent mis-shipment delays. Call (844) 320-6757 if you’ve received a damaged or mis-sized unit and want help navigating the replacement process.
The Bottom Line
The real answer to “how long does window replacement take” is 8 to 16 weeks for a typical Henderson project, with under a week of that being actual installation labor. Lead time, permitting, and inspection scheduling eat the calendar, and custom-sized units in older Henderson housing stock push the whole thing toward the outer edge of that range. The planning moves that protect your timeline are all in the measurement and sequencing phases: final measurement before ordering, permit confirmation up front, staggered vs. whole-house approach decided early, and window delivery locked into the project calendar ahead of finish trades. Done right, the project holds its schedule and the 730-Day Done Right Promise backs the work long after the install crew has left. Call (844) 320-6757 to schedule your free estimate in Henderson.
Written by the team at Groundwork Construction Co. of Henderson.


