







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Enterprise, NV: What the Job Actually Involves
Cabinets & countertops work in Enterprise, NV typically runs $14,000 – $45,000 and takes two to four weeks from tear-out to final caulk line. Cabinet installation alone lands at $4,000 – $13,000; countertop installation at $2,000 – $6,500; a kitchen island adds $3,000 – $10,000. Most Enterprise homes we work in are 1990s-to-2020s stucco-and-frame builds in master-planned subdivisions off the 89139 corridor, which means square walls and level slabs are usually on your side, and the fight is over layout, finish, and matching what the builder installed. Call (844) 320-6757 for a free estimate.
How the Work Moves: Cabinets and Countertops, Stage by Stage

A cabinet-and-countertop job is a sequence with hard stops. The countertop template can’t happen until the cabinets are set and level, and the plumbing can’t reconnect until the countertop is in. Miss the order and you’re paying for a second trip. Here’s how we run it.
Stage 1: Site measure and layout sign-off (day 1, about 2 hours)
We measure every wall to the inch, note out-of-square corners, check where the shutoffs and outlets sit, and confirm the appliance cutouts against the actual units you’ve picked. You approve a dimensioned layout drawing before anything gets ordered. This is the stage where you lock the cabinet box sizes, door style, and countertop edge profile. Changing a box size after this point usually adds a week and a restocking fee.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets, countertops, and backsplash come out. We cap the plumbing and make the electrical safe before anything else happens. Then the walls get patched and floated flat, because Enterprise tract homes often have drywall that reads level but isn’t, and cabinets hung on a wavy wall show every gap at the crown. Floor protection goes down before demo starts, not after. You decide nothing at this stage; we just need the kitchen clear of your belongings.
Stage 3: Cabinet installation (days 4 – 6)
Base cabinets go in first, shimmed and scribed to the wall, then uppers, then the island if there is one. We fasten uppers into studs or add blocking where the wall doesn’t cooperate. Crown, light rail, and filler panels get fit at this point. You’ll walk through door and drawer alignment before we call it done, because hardware and hinges are easier to adjust now than after the countertop is glued down.
Stage 4: Template and countertop fabrication (days 7 – 12, mostly waiting)
A fabricator comes out with a physical template or a digital scan, then cuts the slab in the shop. Stone and quartz take the longest; laminate and solid surface turn faster. You’ll confirm the sink cutout, faucet hole count, and seam placement at the template visit. This is the quiet week. Nothing happens in your kitchen, and that’s normal.
Stage 5: Countertop set, plumbing, and final walk (days 13 – 16)
The slab gets set, seams get epoxied and polished, the sink and faucet reconnect, and the dishwasher gets reconnected. We check the drawer fronts still clear after the countertop weight settles, run water through the drain, and walk the whole job with you against the original layout. Touch-ups, caulk, and any hardware adjustments get handled before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on this job come down to four choices, and each one trades cost against how it lives in a desert kitchen.
- Cabinet boxes: stock, semi-custom, or full custom. Stock sizes ship fast and cost least but force filler strips at the walls. Semi-custom gets you the widths that fit an Enterprise tract kitchen without gaps and is what most of our homeowners land on. Full custom buys exact dimensions and unusual finishes at roughly double the box cost.
- Door material and finish. Painted MDF and thermofoil hold up well in low humidity and cost less; they can chip at edges. Solid wood and plywood-core doors handle daily wear and refinish later, at a higher price. In a Las Vegas valley kitchen with hard summer sun through the window, a lighter finish resists heat-driven fading better than a dark stain.
- Countertop surface. Quartz is the default for a reason: non-porous, no resealing, consistent color. Granite costs similarly now and gives you a one-of-a-kind slab, but it wants sealing every year or two. Laminate is the budget play and reads fine in a rental or a flip. Butcher block and solid surface have their fans but demand more care near the sink.
- Sink and faucet configuration. Undermount sinks look cleaner and are easier to wipe into, but they add fabrication cost. A single-bowl sink fits a sheet pan; a double-bowl suits dishwashing by hand. Pull-down faucets are worth the upgrade over a fixed spout in a working kitchen.
Brands matter less than fit here, but when a homeowner wants a known name, KraftMaid and Cambria are the two we get asked about most, and both are in our partner portfolio.
What Cabinets & Countertops Costs in Enterprise, NV

For a full cabinet-and-countertop swap on a typical Enterprise kitchen, plan on $14,000 – $45,000. The line items break down like this:
| Item | Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
| Full project, cabinets and countertops together | $14,000 – $45,000 |
Five things push a job toward the top of that range. Kitchen size is the biggest: a 10-foot galley and a 20-foot open-plan kitchen are not the same job. Whether we relocate plumbing or electrical is second, because moving a sink or adding a circuit for an induction range means opening walls. Cabinet grade is third. Countertop slab choice is fourth, especially if you fall for an exotic stone with a book-matched seam. And a kitchen island adds its own line item, which is why open-plan homes with a big island skew high.
A written estimate from us includes demo, haul-away, wall prep, cabinet and countertop installation, plumbing and electrical reconnect, and cleanup. It typically doesn’t include the appliance purchase, structural wall changes, or new flooring under the cabinets. We list exclusions in writing so there are no surprises mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise is one of the fastest-built-out master-planned suburbs on Las Vegas’s south valley edge, and that shapes the work. Most of what we see is production-grade tract and custom-home infill along the 89139 corridor, meaning the kitchen we’re tearing out was installed by a builder crew in the 1990s through the 2020s, not by a previous owner who did it by hand. That’s usually good news: walls are true, slabs are level, and cabinet runs follow a standard plan. Where it bites is in the small stuff. Builder-grade cabinets were often shimmed and stapled rather than screwed, so tear-out goes faster than expected and leaves more wall damage behind. Subdivisions in Enterprise also tend to have HOA architectural review for exterior changes, which matters if you’re moving a window or adding a vent hood that changes the stucco, but interior cabinet and countertop work rarely triggers review. Signage and finish changes are worth a quick check with your HOA before you order.
The desert climate does its own work on a kitchen. Hard summer sun through an east or west window will fade a dark stained finish within a few years and cook a laminate top near the glass. We steer homeowners toward lighter, UV-stable finishes and quartz over laminate when the sink run faces direct sun. If your kitchen ties into a wider scope, that’s part of a full Kitchen Remodeling in Enterprise, and our Kitchen Remodeling service team can carry the rest of the project. We cover all of Enterprise and the surrounding south valley, and homeowners often pair this work with a Garage Conversion ADU in Enterprise if the garage is becoming a living space, or a New Detached ADU in Enterprise when the yard is getting a second unit and the main kitchen needs to keep up.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Enterprise

Two to four weeks from demo to final walk, with the longest stretch being the countertop fabrication window. Stock cabinets and laminate tops can compress that to about 10 days; semi-custom cabinets and a stone slab usually land right around three weeks, and custom work plus a large island can push past four. Call (844) 320-6757 and we’ll give you a real timeline against your specific kitchen.
Straight replacement in the same footprint usually needs no permit, but any change to a plumbing line, a new electrical circuit, or a moved wall does. If we’re relocating the sink, adding an outlet for a new range, or taking down a wall, permits and inspections come into play, and we pull them. We’ll tell you in writing which path your job is on before we start.
Yes. Keeping the sink, range, and fridge where they sit keeps the job in the lower half of the price range and cuts the timeline by about a week. Most Enterprise kitchens are laid out sensibly enough that staying put costs you very little functionally. If your layout is the real problem, that’s a bigger conversation.
Cabinet grade and kitchen size, in that order. A stock-box swap on a 10-foot galley can land near $14,000, while semi-custom cabinets, a stone island, and relocated plumbing push past $35,000. Countertop surface choice adds another few thousand. Call (844) 320-6757 for an exact quote – estimates are free.
Every cabinet and countertop job we do is backed by our 730-Day Done Right Promise – if anything we installed isn’t right, we come back and make it right. That covers our workmanship for two full years, which is longer than most countertop fabricators offer. Manufacturer warranties on the cabinets and slab pass through to you separately.
Get a Free Estimate on Cabinets & Countertops in Enterprise
We’ll come out to your Enterprise kitchen, measure the actual space, and hand you a written line-item estimate with the cabinet grade, countertop surface, and timeline spelled out. Upfront pricing, no surprises. If you’re weighing this against a larger project, we’ll tell you honestly what’s worth doing now. Call (844) 320-6757 – a live person answers, day or night.
Written by the team at Groundwork Construction Co.












