







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Henderson, NV: What the Job Actually Involves
Door installation in Henderson typically runs $350 to $1,200 per door for an interior swap and $900 to $3,500 for an exterior entry or patio door, with most single-door projects finished in one to two days. The work covers demolition of the old slab or frame, squaring and shimming the rough opening, flashing and sealing the exterior, hanging and adjusting the door, and a final inspection pass. Call (844) 320-6757 for a free on-site estimate. We’ll measure the opening, check the wall for rot or settling, and hand you a written line-item price before anything gets ordered.
How We Run a Door Installation, Stage by Stage

Door work looks simple from the driveway and gets complicated fast once the trim comes off. Here’s the actual sequence so you know what to expect on day one versus day three.
Stage 1: Measure and order (day 1, 45 to 90 minutes)
We pull the interior casing and check the rough opening for square, plumb, and true width. On Henderson stucco homes we also probe the exterior wall for moisture intrusion and stucco cracking around the existing frame. This is where you decide the door itself: material, glazing, handing, and whether you’re keeping the same size or resizing. Custom sizes and impact-rated exterior units take two to four weeks to arrive; standard stock sizes are often available the same week.
Stage 2: Demo and prep (day of install, 1 to 3 hours)
Out comes the old door, frame, and threshold. We cut back damaged drywall and any rotted framing, then rebuild the opening square. On older ranch homes near Water Street we routinely find that a previous owner shimmed a sagging header instead of fixing it, and that has to be corrected before a new door will close cleanly.
Stage 3: Set, flash, and seal (2 to 4 hours)
The new unit gets set plumb, shimmed at the hinge and lock points, and fastened through the frame. Exterior doors get a sill pan, flashing tape at the head and jambs, and a proper sealant bead. This is the stage that decides whether the door leaks in five years, and it’s the one we don’t rush.
Stage 4: Hardware and finish (1 to 3 hours)
Hinges, lockset, deadbolt, weatherstripping, threshold seal, and interior casing go on. We adjust for a consistent reveal and a smooth swing, then check that the door latches with light pressure. If you’re adding a smart lock or a keypad deadbolt, bring it out now and we’ll fit it during this stage.
Stage 5: Walkthrough and touch-up (30 to 60 minutes)
We test the door through a full open-and-close cycle, hand you the warranty paperwork, and touch up paint at the casing and any drywall patching. Most interior doors wrap up in a single visit. Exterior units with flashing and stucco repair often run into a second day for the patch and paint.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Steel entry doors: the most common choice for Henderson front doors. Strong, weathers desert heat well, and takes a factory finish that holds up. The trade-off is weight and the risk of dents at the lower panel if it’s kicked or hit. Expect $1,400 to $3,200 installed for a standard 36-inch unit.
- Fiberglass entry doors: won’t dent, won’t rust, and comes in wood-grain textures that fool most people. Costs $200 to $500 more than steel and is the better pick for a west-facing door that takes full afternoon sun.
- Solid wood entry doors: the premium look for Seven Hills and Anthem semi-custom homes. Beautiful until the dry air and 100-degree swings start working the joints. Needs a yearly seal check, and it’s the most expensive exterior option.
- Impact-rated exterior doors: glazed units rated for wind-borne debris, which matters if you’re replacing a patio door or a sidelight. PGT makes impact glazing that pairs well with the rest of a Henderson exterior package. Costs 25 to 40 percent more than the same door in standard glass.
- Interior hollow-core vs. solid-core: hollow-core runs $350 to $700 installed and is fine for closets and secondary bedrooms. Solid-core runs $600 to $1,100 and quiets a room noticeably, which is worth it for a home office or a primary suite.
- Slab vs. prehung: a slab door replaces just the panel and reuses the existing frame. It’s cheaper but only works if the frame is square. A prehung unit comes with a new frame and is the safer bet in homes where a previous door was hung poorly.
What Door Installation Costs in Henderson, NV

Plan on $350 to $1,200 for an interior door installed, and $900 to $3,500 for an exterior entry or patio door, with the spread driven by material and what’s hiding behind the trim.
- $350 – $700: interior hollow-core with basic hardware.
- $600 – $1,100: interior solid-core with upgraded hardware.
- $900 – $1,600: exterior steel entry with standard glass.
- $1,400 – $3,200: steel or fiberglass entry with premium hardware.
- $2,200 – $3,500+: impact-rated glazed exterior or patio unit.
Four things move the number. Size and handing matter less than the wall itself: a door going into a 1990s Green Valley tract home with square framing is a clean job, while the same door in a settled Water Street ranch can need header repair and new drywall. Material grade is the second lever. Rot or water damage behind the frame is the third, and it’s the one that surprises people, since a $900 install can become $1,800 once we open the wall. Permit scope is the fourth: interior door swaps need no permit, but widening an opening or moving an exterior door in a load-bearing wall does, and that pulls in a City of Henderson inspection.
Our written estimate covers demo, disposal, framing repair up to an agreed limit, the door, hardware, flashing, sealant, casing, and touch-up. It doesn’t cover a new paint color on the surrounding wall, a new storm-door combo unless you ask for it, or stucco repair beyond normal patching. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Henderson Homes Specifically Do to This Job
Henderson built out through the 1990s and 2000s in master-planned tracts, so most of the doors we replace are 20 to 35 years old and failing in predictable ways. In Green Valley we see entry doors whose weatherstripping has baked flat from years of west-facing sun, letting in dust and driving up summer cooling bills. Up in Seven Hills and Anthem, the sloped lots and expansive clay mean exterior frames settle unevenly, and a door that swung clean in 2005 now drags at the bottom corner. That settling is a door problem and a foundation conversation, and we’d rather tell you which one you have than sell you a new door that re-sticks by fall. The older ranch stock near Water Street is a different job: 1950s and 1960s framing, often with a shimmed header, and it takes real carpentry to make a prehung unit fit. On top of that, most of these communities run HOA design review, so a front-door color or style change usually needs approval before we order. That’s a two-to-four-week approval window, and we tell you upfront so your install date isn’t a surprise.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Henderson

A single interior door is usually done in one visit of two to four hours; an exterior entry door with flashing and stucco patching takes a full day, sometimes spilling into a second morning for paint. Multiple doors in the same house get batched, so three or four interior doors often finish in one day. Call (844) 320-6757 and we’ll give you a realistic schedule for your job.
Interior door swaps and same-size exterior replacements generally don’t need a City of Henderson permit. Widening an opening, moving a door in a load-bearing wall, or adding a new exterior opening does, and we pull it and pass the inspection as part of the job. We’ll tell you which category your project falls into on the estimate.
Yes, in the large majority of cases. A same-size replacement keeps the rough opening intact, so no framing changes and no plumbing or electrical work. If you want to move the door to a different wall or widen it for a double door, that’s a bigger scope with structural and possibly electrical implications, and we quote it as a separate line so you can compare.
Interior doors run $350 to $1,200 installed, and exterior entry or patio doors run $900 to $3,500, with impact-rated glazed units at the top of that range. The variables are material, hardware, any rot found behind the frame, and whether a permit is needed. Call (844) 320-6757 for an exact quote. Estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space: if it’s not done right, we make it right. The door itself carries the manufacturer’s warranty, which varies by brand and product line, and we hand you that paperwork at the walkthrough. Questions later? We answer the phone.
Get a Free Door Installation Estimate in Henderson
Whether it’s one sticking front door or a whole house of interior units, we’ll come out, measure the openings, and hand you a written line-item estimate with no pressure and no change orders. Call (844) 320-6757 and a real person answers, any hour. We’ll set a time, talk through your door options, and tell you honestly whether the frame can be saved or replaced. Free estimate, real numbers.
Written by the team at Groundwork Construction Co.












